Progress Bar

When executing longer-running commands, it may be helpful to show progress information, which updates as your command runs:

Note

As an alternative, consider using the SymfonyStyle to display a progress bar.

To display progress details, use the ProgressBar, pass it a total number of units, and advance the progress as the command executes:

        1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
        use Symfony\Component\Console\Helper\ProgressBar;

// creates a new progress bar (50 units)
$progressBar = new ProgressBar($output, 50);

// starts and displays the progress bar
$progressBar->start();

$i = 0;
while ($i++ < 50) {
    // ... do some work

    // advances the progress bar 1 unit
    $progressBar->advance();

    // you can also advance the progress bar by more than 1 unit
    // $progressBar->advance(3);
}

// ensures that the progress bar is at 100%
$progressBar->finish();
    

Tip

You can also regress the progress bar (i.e. step backwards) by calling $progress->advance() with a negative value. For example, if you call $progress->advance(-2) then it will regress the progress bar 2 steps.

Note

By default, the progress bar helper uses the error output (stderr) as its default output. This behavior can be changed by passing an instance of StreamOutput to the ProgressBar constructor.

Instead of advancing the bar by a number of steps (with the advance() method), you can also set the current progress by calling the setProgress() method.

If you are resuming long-standing tasks, it's useful to start drawing the progress bar at a certain point. Use the second optional argument of start() to set that starting point:

        1
2
3
4
5
6
7
        use Symfony\Component\Console\Helper\ProgressBar;

// creates a new progress bar (100 units)
$progressBar = new ProgressBar($output, 100);

// displays the progress bar starting at 25 completed units
$progressBar->start(null, 25);
    

Tip

If your platform doesn't support ANSI codes, updates to the progress bar are added as new lines. To prevent the output from being flooded, use the minSecondsBetweenRedraws() method to limit the number of redraws and the setRedrawFrequency() method to redraw every N iterations. By default, redraw frequency is 100ms or 10% of your max.

If you don't know the exact number of steps in advance, set it to a reasonable value and then call the setMaxSteps() method to update it as needed:

        1
2
3
4
5
        // start with a 50 units progressbar
$progressBar = new ProgressBar($output, 50);

// a complex task has just been created: increase the progressbar to 200 units
$progressBar->setMaxSteps(200);
    

Another solution is to omit the steps argument when creating the ProgressBar instance:

        1
        $progressBar = new ProgressBar($output);
    

The progress will then be displayed as a throbber:

        1
2
3
4
5
6
7
8
9
        # no max steps (displays it like a throbber)
    0 [>---------------------------]
    5 [----->----------------------]
    5 [============================]

# max steps defined
 0/3 [>---------------------------]   0%
 1/3 [=========>------------------]  33%
 3/3 [============================] 100%
    

Tip

An alternative to this is to use a Progress Indicator instead of a progress bar.

Whenever your task is finished, don't forget to call finish() to ensure that the progress bar display is refreshed with a 100% completion.

Note

If you want to output something while the progress bar is running, call clear() first. After you're done, call display() to show the progress bar again.

If the progress information is stored in an iterable variable (such as an array or a PHP generator) you can use the iterate() method, which starts, advances and finishes the progress bar automatically:

        1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
        use Symfony\Component\Console\Helper\ProgressBar;

$progressBar = new ProgressBar($output);

// $iterable can be array
$iterable = [1, 2];
foreach ($progressBar->iterate($iterable) as $value) {
    // ... do some work
}

// or a generator
function iterable() { yield 1; yield 2; ... };
foreach ($progressBar->iterate(iterable()) as $value) {
    // ... do some work
}
    

The previous code will output:

        1
2
3
        0/2 [>---------------------------]   0%
1/2 [==============>-------------]  50%
2/2 [============================] 100%
    

Customizing the Progress Bar

Built-in Formats

By default, the information rendered on a progress bar depends on the current level of verbosity of the OutputInterface instance:

        1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
        # OutputInterface::VERBOSITY_NORMAL (CLI with no verbosity flag)
 0/3 [>---------------------------]   0%
 1/3 [=========>------------------]  33%
 3/3 [============================] 100%

# OutputInterface::VERBOSITY_VERBOSE (-v)
 0/3 [>---------------------------]   0%  1 sec
 1/3 [=========>------------------]  33%  1 sec
 3/3 [============================] 100%  1 sec

# OutputInterface::VERBOSITY_VERY_VERBOSE (-vv)
 0/3 [>---------------------------]   0%  1 sec/1 sec
 1/3 [=========>------------------]  33%  1 sec/1 sec
 3/3 [============================] 100%  1 sec/1 sec

# OutputInterface::VERBOSITY_DEBUG (-vvv)
 0/3 [>---------------------------]   0%  1 sec/1 sec  1.0 MB
 1/3 [=========>------------------]  33%  1 sec/1 sec  1.0 MB
 3/3 [============================] 100%  1 sec/1 sec  1.0 MB
    

Note

If you call a command with the quiet flag (-q), the progress bar won't be displayed.

Instead of relying on the verbosity mode of the current command, you can also force a format via setFormat():

        1
        $progressBar->setFormat('verbose');
    

The built-in formats are the following:

normal
verbose
very_verbose
debug

If you don't set the number of steps for your progress bar, use the _nomax variants:

normal_nomax
verbose_nomax
very_verbose_nomax
debug_nomax

Custom Formats

Instead of using the built-in formats, you can also set your own:

        1
        $progressBar->setFormat('%bar%');
    

This sets the format to only display the progress bar itself:

        1
2
3
        >---------------------------
=========>------------------
============================
    

A progress bar format is a string that contains specific placeholders (a name enclosed with the % character); the placeholders are replaced based on the current progress of the bar. Here is a list of the built-in placeholders:

current: The current step;
max: The maximum number of steps (or 0 if no max is defined);
bar: The bar itself;
percent: The percentage of completion (not available if no max is defined);
elapsed: The time elapsed since the start of the progress bar;
remaining: The remaining time to complete the task (not available if no max is defined);
estimated: The estimated time to complete the task (not available if no max is defined);
memory: The current memory usage;
message: used to display arbitrary messages in the progress bar (as explained later).

The time fields elapsed, remaining and estimated are displayed with a precision of 2. That means 172799 seconds are displayed as 1 day, 23 hrs instead of 1 day, 23 hrs, 59 mins, 59 secs.

For instance, here is how you could set the format to be the same as the debug one:

        1
        $progressBar->setFormat(' %current%/%max% [%bar%] %percent:3s%% %elapsed:16s%/%estimated:-16s% %memory:6s%');
    

Notice the :6s part added to some placeholders? That's how you can tweak the appearance of the bar (formatting and alignment). The part after the colon (:) is used to set the sprintf format of the string.

Instead of setting the format for a given instance of a progress bar, you can also define global formats:

        1
2
3
4
        ProgressBar::setFormatDefinition('minimal', 'Progress: %percent%%');

$progressBar = new ProgressBar($output, 3);
$progressBar->setFormat('minimal');
    

This code defines a new minimal format that you can then use for your progress bars:

        1
2
3
        Progress: 0%
Progress: 33%
Progress: 100%
    

Tip

It is almost always better to redefine built-in formats instead of creating new ones as that allows the display to automatically vary based on the verbosity flag of the command.

When defining a new style that contains placeholders that are only available when the maximum number of steps is known, you should create a _nomax variant:

        1
2
3
4
5
        ProgressBar::setFormatDefinition('minimal', '%percent%% %remaining%');
ProgressBar::setFormatDefinition('minimal_nomax', '%percent%%');

$progressBar = new ProgressBar($output);
$progressBar->setFormat('minimal');
    

When displaying the progress bar, the format will automatically be set to minimal_nomax if the bar does not have a maximum number of steps like in the example above.

Tip

A format can contain any valid ANSI codes and can also use the Symfony-specific way to set colors:

        1
2
3
4
        ProgressBar::setFormatDefinition(
    'minimal',
    '<info>%percent%</info>\033[32m%\033[0m <fg=white;bg=blue>%remaining%</>'
);
    

Note

A format can span more than one line; that's very useful when you want to display more contextual information alongside the progress bar (see the example at the beginning of this article).

Bar Settings

Among the placeholders, bar is a bit special as all the characters used to display it can be customized:

        1
2
3
4
5
6
7
8
9
10
11
        // the finished part of the bar
$progressBar->setBarCharacter('<comment>=</comment>');

// the unfinished part of the bar
$progressBar->setEmptyBarCharacter(' ');

// the progress character
$progressBar->setProgressCharacter('|');

// the bar width
$progressBar->setBarWidth(50);
    

Caution

For performance reasons, Symfony redraws the screen once every 100ms. If this is too fast or too slow for your application, use the methods minSecondsBetweenRedraws() and maxSecondsBetweenRedraws():

        1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
        $progressBar = new ProgressBar($output, 50000);
$progressBar->start();

// this redraws the screen every 100 iterations, but sets additional limits:
// don't redraw slower than 200ms (0.2) or faster than 100ms (0.1)
$progressBar->setRedrawFrequency(100);
$progressBar->maxSecondsBetweenRedraws(0.2);
$progressBar->minSecondsBetweenRedraws(0.1);

$i = 0;
while ($i++ < 50000) {
    // ... do some work

    $progressBar->advance();
}
    

Custom Placeholders

If you want to display some information that depends on the progress bar display that are not available in the list of built-in placeholders, you can create your own. Let's see how you can create a remaining_steps placeholder that displays the number of remaining steps:

        1
2
3
4
5
6
7
        // This definition is globally registered for all ProgressBar instances
ProgressBar::setPlaceholderFormatterDefinition(
    'remaining_steps',
    function (ProgressBar $progressBar, OutputInterface $output): int {
        return $progressBar->getMaxSteps() - $progressBar->getProgress();
    }
);
    

It is also possible to set a placeholder formatter per ProgressBar instance with the setPlaceholderFormatter method:

        1
2
3
4
5
        $progressBar = new ProgressBar($output, 3, 0);
$progressBar->setFormat('%countdown% [%bar%]');
$progressBar->setPlaceholderFormatter('countdown', function (ProgressBar $progressBar) {
    return $progressBar->getMaxSteps() - $progressBar->getProgress();
});
    

Custom Messages

Progress bars define a placeholder called message to display arbitrary messages. However, none of the built-in formats include that placeholder, so before displaying these messages, you must define your own custom format:

        1
2
3
4
        ProgressBar::setFormatDefinition('custom', ' %current%/%max% -- %message%');

$progressBar = new ProgressBar($output, 100);
$progressBar->setFormat('custom');
    

Now, use the setMessage() method to set the value of the %message% placeholder before displaying the progress bar:

        1
2
3
4
5
6
7
8
        // ...
$progressBar->setMessage('Start');
$progressBar->start();
// 0/100 -- Start

$progressBar->setMessage('Task is in progress...');
$progressBar->advance();
// 1/100 -- Task is in progress...
    

Messages can be combined with custom placeholders too. In this example, the progress bar uses the %message% and %filename% placeholders:

        1
2
3
4
        ProgressBar::setFormatDefinition('custom', ' %current%/%max% -- %message% (%filename%)');

$progressBar = new ProgressBar($output, 100);
$progressBar->setFormat('custom');
    

The setMessage() method accepts a second optional argument to set the value of the custom placeholders:

        1
2
3
4
5
6
7
8
        // ...
// $files = ['client-001/invoices.xml', '...'];
foreach ($files as $filename) {
    $progressBar->setMessage('Importing invoices...');
    $progressBar->setMessage($filename, 'filename');
    $progressBar->advance();
    // 2/100 -- Importing invoices... (client-001/invoices.xml)
}
    

Displaying Multiple Progress Bars

When using Console output sections it's possible to display multiple progress bars at the same time and change their progress independently:

        1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
        $section1 = $output->section();
$section2 = $output->section();

$progress1 = new ProgressBar($section1);
$progress2 = new ProgressBar($section2);

$progress1->start(100);
$progress2->start(100);

$i = 0;
while (++$i < 100) {
    $progress1->advance();

    if ($i % 2 === 0) {
        $progress2->advance(4);
    }

    usleep(50000);
}
    

After a couple of iterations, the output in the terminal will look like this:

        1
2
        34/100 [=========>------------------]  34%
68/100 [===================>--------]  68%
    

This work, including the code samples, is licensed under a Creative Commons BY-SA 3.0 license.

TOC

Version

Symfony 7.1 is backed by

Check Code Performance in Dev, Test, Staging & Production

Be trained by SensioLabs experts (2 to 6 day sessions -- French or English).