Translations

Warning: You are browsing the documentation for Symfony 2.0, which is no longer maintained.

Read the updated version of this page for Symfony 6.3 (the current stable version).

Translations

The term "internationalization" (often abbreviated i18n) refers to the process of abstracting strings and other locale-specific pieces out of your application and into a layer where they can be translated and converted based on the user's locale (i.e. language and country). For text, this means wrapping each with a function capable of translating the text (or "message") into the language of the user:

        1
2
3
4
5
6
        // text will *always* print out in English
echo 'Hello World';

// text can be translated into the end-user's language or
// default to English
echo $translator->trans('Hello World');
    

Note

The term locale refers roughly to the user's language and country. It can be any string that your application uses to manage translations and other format differences (e.g. currency format). The ISO639-1 language code, an underscore (_), then the ISO3166 Alpha-2 country code (e.g. fr_FR for French/France) is recommended.

In this chapter, you'll learn how to prepare an application to support multiple locales and then how to create translations for multiple locales. Overall, the process has several common steps:

Enable and configure Symfony's Translation component;
Abstract strings (i.e. "messages") by wrapping them in calls to the Translator;
Create translation resources for each supported locale that translate each message in the application;
Determine, set and manage the user's locale in the session.

Configuration

Translations are handled by a Translator service that uses the user's locale to lookup and return translated messages. Before using it, enable the Translator in your configuration:

        1
2
3
        # app/config/config.yml
framework:
    translator: { fallback: en }
    

        1
2
3
4
        <!-- app/config/config.xml -->
<framework:config>
    <framework:translator fallback="en" />
</framework:config>
    

        1
2
3
4
        // app/config/config.php
$container->loadFromExtension('framework', array(
    'translator' => array('fallback' => 'en'),
));
    

The fallback option defines the fallback locale when a translation does not exist in the user's locale.

Tip

When a translation does not exist for a locale, the translator first tries to find the translation for the language (fr if the locale is fr_FR for instance). If this also fails, it looks for a translation using the fallback locale.

The locale used in translations is the one stored in the user session.

Basic Translation

Translation of text is done through the translator service (Translator). To translate a block of text (called a message), use the trans() method. Suppose, for example, that you're translating a simple message from inside a controller:

        1
2
3
4
5
6
7
8
9
        // ...
use Symfony\Component\HttpFoundation\Response;

public function indexAction()
{
    $translated = $this->get('translator')->trans('Symfony2 is great');

    return new Response($translated);
}
    

When this code is executed, Symfony2 will attempt to translate the message "Symfony2 is great" based on the locale of the user. For this to work, you need to tell Symfony2 how to translate the message via a "translation resource", which is a collection of message translations for a given locale. This "dictionary" of translations can be created in several different formats, XLIFF being the recommended format:

        1
2
3
4
5
6
7
8
9
10
11
12
        <!-- messages.fr.xliff -->
<?xml version="1.0"?>
<xliff version="1.2" xmlns="urn:oasis:names:tc:xliff:document:1.2">
    <file source-language="en" datatype="plaintext" original="file.ext">
        <body>
            <trans-unit id="1">
                <source>Symfony2 is great</source>
                <target>J'aime Symfony2</target>
            </trans-unit>
        </body>
    </file>
</xliff>
    

        1
2
3
4
        // messages.fr.php
return array(
    'Symfony2 is great' => 'J\'aime Symfony2',
);
    

        1
2
        # messages.fr.yml
Symfony2 is great: J'aime Symfony2
    

Now, if the language of the user's locale is French (e.g. fr_FR or fr_BE), the message will be translated into J'aime Symfony2.

The Translation Process

To actually translate the message, Symfony2 uses a simple process:

The locale of the current user, which is stored in the session, is determined;
A catalog of translated messages is loaded from translation resources defined for the locale (e.g. fr_FR). Messages from the fallback locale are also loaded and added to the catalog if they don't already exist. The end result is a large "dictionary" of translations. See Message Catalogues for more details;
If the message is located in the catalog, the translation is returned. If not, the translator returns the original message.

When using the trans() method, Symfony2 looks for the exact string inside the appropriate message catalog and returns it (if it exists).

Message Placeholders

Sometimes, a message containing a variable needs to be translated:

        1
2
3
4
5
6
7
8
9
        // ...
use Symfony\Component\HttpFoundation\Response;

public function indexAction($name)
{
    $translated = $this->get('translator')->trans('Hello '.$name);

    return new Response($translated);
}
    

However, creating a translation for this string is impossible since the translator will try to look up the exact message, including the variable portions (e.g. "Hello Ryan" or "Hello Fabien"). Instead of writing a translation for every possible iteration of the $name variable, you can replace the variable with a "placeholder":

        1
2
3
4
5
6
7
8
9
10
11
12
        // ...
use Symfony\Component\HttpFoundation\Response;

public function indexAction($name)
{
    $translated = $this->get('translator')->trans(
        'Hello %name%',
        array('%name%' => $name)
    );

    return new Response($translated);
}
    

Symfony2 will now look for a translation of the raw message (Hello %name%) and then replace the placeholders with their values. Creating a translation is done just as before:

        1
2
3
4
5
6
7
8
9
10
11
12
        <!-- messages.fr.xliff -->
<?xml version="1.0"?>
<xliff version="1.2" xmlns="urn:oasis:names:tc:xliff:document:1.2">
    <file source-language="en" datatype="plaintext" original="file.ext">
        <body>
            <trans-unit id="1">
                <source>Hello %name%</source>
                <target>Bonjour %name%</target>
            </trans-unit>
        </body>
    </file>
</xliff>
    

        1
2
3
4
        // messages.fr.php
return array(
    'Hello %name%' => 'Bonjour %name%',
);
    

        1
2
        # messages.fr.yml
'Hello %name%': Bonjour %name%
    

Note

The placeholders can take on any form as the full message is reconstructed using the PHP strtr function. However, the %var% notation is required when translating in Twig templates, and is overall a sensible convention to follow.

As you've seen, creating a translation is a two-step process:

Abstract the message that needs to be translated by processing it through the Translator.
Create a translation for the message in each locale that you choose to support.

The second step is done by creating message catalogues that define the translations for any number of different locales.

Message Catalogues

When a message is translated, Symfony2 compiles a message catalogue for the user's locale and looks in it for a translation of the message. A message catalogue is like a dictionary of translations for a specific locale. For example, the catalogue for the fr_FR locale might contain the following translation:

        1
        Symfony2 is Great => J'aime Symfony2
    

It's the responsibility of the developer (or translator) of an internationalized application to create these translations. Translations are stored on the filesystem and discovered by Symfony, thanks to some conventions.

Tip

Each time you create a new translation resource (or install a bundle that includes a translation resource), be sure to clear your cache so that Symfony can discover the new translation resource:

        1
        $ php app/console cache:clear
    

Translation Locations and Naming Conventions

Symfony2 looks for message files (i.e. translations) in two locations:

For messages found in a bundle, the corresponding message files should live in the Resources/translations/ directory of the bundle;
To override any bundle translations, place message files in the app/Resources/translations directory.

The filename of the translations is also important as Symfony2 uses a convention to determine details about the translations. Each message file must be named according to the following pattern: domain.locale.loader:

domain: An optional way to organize messages into groups (e.g. admin, navigation or the default messages) - see Using Message Domains;
locale: The locale that the translations are for (e.g. en_GB, en, etc);
loader: How Symfony2 should load and parse the file (e.g. xliff, php or yml).

The loader can be the name of any registered loader. By default, Symfony provides the following loaders:

xliff: XLIFF file;
php: PHP file;
yml: YAML file.

The choice of which loader to use is entirely up to you and is a matter of taste.

Note

You can also store translations in a database, or any other storage by providing a custom class implementing the LoaderInterface interface.

Creating Translations

The act of creating translation files is an important part of "localization" (often abbreviated L10n). Translation files consist of a series of id-translation pairs for the given domain and locale. The source is the identifier for the individual translation, and can be the message in the main locale (e.g. "Symfony is great") of your application or a unique identifier (e.g. "symfony2.great" - see the sidebar below):

        1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
        <!-- src/Acme/DemoBundle/Resources/translations/messages.fr.xliff -->
<?xml version="1.0"?>
<xliff version="1.2" xmlns="urn:oasis:names:tc:xliff:document:1.2">
    <file source-language="en" datatype="plaintext" original="file.ext">
        <body>
            <trans-unit id="1">
                <source>Symfony2 is great</source>
                <target>J'aime Symfony2</target>
            </trans-unit>
            <trans-unit id="2">
                <source>symfony2.great</source>
                <target>J'aime Symfony2</target>
            </trans-unit>
        </body>
    </file>
</xliff>
    

        1
2
3
4
5
        // src/Acme/DemoBundle/Resources/translations/messages.fr.php
return array(
    'Symfony2 is great' => 'J\'aime Symfony2',
    'symfony2.great'    => 'J\'aime Symfony2',
);
    

        1
2
3
        # src/Acme/DemoBundle/Resources/translations/messages.fr.yml
Symfony2 is great: J'aime Symfony2
symfony2.great:    J'aime Symfony2
    

Symfony2 will discover these files and use them when translating either "Symfony2 is great" or "symfony2.great" into a French language locale (e.g. fr_FR or fr_BE).

This example illustrates the two different philosophies when creating messages to be translated:

        1
2
3
        $translated = $translator->trans('Symfony2 is great');

$translated = $translator->trans('symfony2.great');
    

In the first method, messages are written in the language of the default locale (English in this case). That message is then used as the "id" when creating translations.

In the second method, messages are actually "keywords" that convey the idea of the message. The keyword message is then used as the "id" for any translations. In this case, translations must be made for the default locale (i.e. to translate symfony2.great to Symfony2 is great).

The second method is handy because the message key won't need to be changed in every translation file if you decide that the message should actually read "Symfony2 is really great" in the default locale.

The choice of which method to use is entirely up to you, but the "keyword" format is often recommended.

Additionally, the php and yaml file formats support nested ids to avoid repeating yourself if you use keywords instead of real text for your ids:

        1
2
3
4
5
6
7
8
        symfony2:
    is:
        great: Symfony2 is great
        amazing: Symfony2 is amazing
    has:
        bundles: Symfony2 has bundles
user:
    login: Login
    

The multiple levels are flattened into single id/translation pairs by adding a dot (.) between every level, therefore the above examples are equivalent to the following:

        1
2
3
4
        symfony2.is.great: Symfony2 is great
symfony2.is.amazing: Symfony2 is amazing
symfony2.has.bundles: Symfony2 has bundles
user.login: Login
    

Using Message Domains

As you've seen, message files are organized into the different locales that they translate. The message files can also be organized further into "domains". When creating message files, the domain is the first portion of the filename. The default domain is messages. For example, suppose that, for organization, translations were split into three different domains: messages, admin and navigation. The French translation would have the following message files:

messages.fr.xliff
admin.fr.xliff
navigation.fr.xliff

When translating strings that are not in the default domain (messages), you must specify the domain as the third argument of trans():

        1
        $this->get('translator')->trans('Symfony2 is great', array(), 'admin');
    

Symfony2 will now look for the message in the admin domain of the user's locale.

Handling the User's Locale

The locale of the current user is stored in the session and is accessible via the session service:

        1
2
3
        $locale = $this->get('session')->getLocale();

$this->get('session')->setLocale('en_US');
    

Fallback and Default Locale

If the locale hasn't been set explicitly in the session, the fallback_locale configuration parameter will be used by the Translator. The parameter defaults to en (see Configuration).

Alternatively, you can guarantee that a locale is set on the user's session by defining a default_locale for the session service:

        1
2
3
        # app/config/config.yml
framework:
    session: { default_locale: en }
    

        1
2
3
4
        <!-- app/config/config.xml -->
<framework:config>
    <framework:session default-locale="en" />
</framework:config>
    

        1
2
3
4
        // app/config/config.php
$container->loadFromExtension('framework', array(
    'session' => array('default_locale' => 'en'),
));
    

The Locale and the URL

Since the locale of the user is stored in the session, it may be tempting to use the same URL to display a resource in many different languages based on the user's locale. For example, http://www.example.com/contact could show content in English for one user and French for another user. Unfortunately, this violates a fundamental rule of the Web: that a particular URL returns the same resource regardless of the user. To further muddy the problem, which version of the content would be indexed by search engines?

A better policy is to include the locale in the URL. This is fully-supported by the routing system using the special _locale parameter:

        1
2
3
4
5
        contact:
    pattern:   /{_locale}/contact
    defaults:  { _controller: AcmeDemoBundle:Contact:index, _locale: en }
    requirements:
        _locale: en|fr|de
    

        1
2
3
4
5
        <route id="contact" pattern="/{_locale}/contact">
    <default key="_controller">AcmeDemoBundle:Contact:index</default>
    <default key="_locale">en</default>
    <requirement key="_locale">en|fr|de</requirement>
</route>
    

        1
2
3
4
5
6
7
8
9
10
11
12
        use Symfony\Component\Routing\RouteCollection;
use Symfony\Component\Routing\Route;

$collection = new RouteCollection();
$collection->add('contact', new Route('/{_locale}/contact', array(
    '_controller' => 'AcmeDemoBundle:Contact:index',
    '_locale'     => 'en',
), array(
    '_locale'     => 'en|fr|de',
)));

return $collection;
    

When using the special `_locale` parameter in a route, the matched locale will automatically be set on the user's session. In other words, if a user visits the URI /fr/contact, the locale fr will automatically be set as the locale for the user's session.

You can now use the user's locale to create routes to other translated pages in your application.

Pluralization

Message pluralization is a tough topic as the rules can be quite complex. For instance, here is the mathematic representation of the Russian pluralization rules:

        1
2
3
4
5
6
7
8
9
        (($number % 10 == 1) && ($number % 100 != 11))
    ? 0
    : ((($number % 10 >= 2)
        && ($number % 10 <= 4)
        && (($number % 100 < 10)
        || ($number % 100 >= 20)))
            ? 1
            : 2
);
    

As you can see, in Russian, you can have three different plural forms, each given an index of 0, 1 or 2. For each form, the plural is different, and so the translation is also different.

When a translation has different forms due to pluralization, you can provide all the forms as a string separated by a pipe (|):

        1
        'There is one apple|There are %count% apples'
    

To translate pluralized messages, use the transChoice() method:

        1
2
3
4
5
        $translated = $this->get('translator')->transChoice(
    'There is one apple|There are %count% apples',
    10,
    array('%count%' => 10)
);
    

The second argument (10 in this example), is the number of objects being described and is used to determine which translation to use and also to populate the %count% placeholder.

Based on the given number, the translator chooses the right plural form. In English, most words have a singular form when there is exactly one object and a plural form for all other numbers (0, 2, 3...). So, if count is 1, the translator will use the first string (There is one apple) as the translation. Otherwise it will use There are %count% apples.

Here is the French translation:

        1
        'Il y a %count% pomme|Il y a %count% pommes'
    

Even if the string looks similar (it is made of two sub-strings separated by a pipe), the French rules are different: the first form (no plural) is used when count is 0 or 1. So, the translator will automatically use the first string (Il y a %count% pomme) when count is 0 or 1.

Each locale has its own set of rules, with some having as many as six different plural forms with complex rules behind which numbers map to which plural form. The rules are quite simple for English and French, but for Russian, you'd may want a hint to know which rule matches which string. To help translators, you can optionally "tag" each string:

        1
2
3
        'one: There is one apple|some: There are %count% apples'

'none_or_one: Il y a %count% pomme|some: Il y a %count% pommes'
    

The tags are really only hints for translators and don't affect the logic used to determine which plural form to use. The tags can be any descriptive string that ends with a colon (:). The tags also do not need to be the same in the original message as in the translated one.

Tip

As tags are optional, the translator doesn't use them (the translator will only get a string based on its position in the string).

Explicit Interval Pluralization

The easiest way to pluralize a message is to let Symfony2 use internal logic to choose which string to use based on a given number. Sometimes, you'll need more control or want a different translation for specific cases (for 0, or when the count is negative, for example). For such cases, you can use explicit math intervals:

        1
        '{0} There are no apples|{1} There is one apple|]1,19] There are %count% apples|[20,Inf] There are many apples'
    

The intervals follow the ISO 31-11 notation. The above string specifies four different intervals: exactly 0, exactly 1, 2-19, and 20 and higher.

You can also mix explicit math rules and standard rules. In this case, if the count is not matched by a specific interval, the standard rules take effect after removing the explicit rules:

        1
        '{0} There are no apples|[20,Inf] There are many apples|There is one apple|a_few: There are %count% apples'
    

For example, for 1 apple, the standard rule There is one apple will be used. For 2-19 apples, the second standard rule There are %count% apples will be selected.

An Interval can represent a finite set of numbers:

        1
        {1,2,3,4}
    

Or numbers between two other numbers:

        1
2
        [1, +Inf[
]-1,2[
    

The left delimiter can be [ (inclusive) or ] (exclusive). The right delimiter can be [ (exclusive) or ] (inclusive). Beside numbers, you can use -Inf and +Inf for the infinite.

Translations in Templates

Most of the time, translation occurs in templates. Symfony2 provides native support for both Twig and PHP templates.

Twig Templates

Symfony2 provides specialized Twig tags (trans and transchoice) to help with message translation of static blocks of text:

        1
2
3
4
5
        {% trans %}Hello %name%{% endtrans %}

{% transchoice count %}
    {0} There are no apples|{1} There is one apple|]1,Inf] There are %count% apples
{% endtranschoice %}
    

The transchoice tag automatically gets the %count% variable from the current context and passes it to the translator. This mechanism only works when you use a placeholder following the %var% pattern.

Tip

If you need to use the percent character (%) in a string, escape it by doubling it: {% trans %}Percent: %percent%%%{% endtrans %}

You can also specify the message domain and pass some additional variables:

        1
2
3
4
5
6
7
        {% trans with {'%name%': 'Fabien'} from "app" %}Hello %name%{% endtrans %}

{% trans with {'%name%': 'Fabien'} from "app" into "fr" %}Hello %name%{% endtrans %}

{% transchoice count with {'%name%': 'Fabien'} from "app" %}
    {0} %name%, there are no apples|{1} %name%, there is one apple|]1,Inf] %name%, there are %count% apples
{% endtranschoice %}
    

The trans and transchoice filters can be used to translate variable texts and complex expressions:

        1
2
3
4
5
6
7
        {{ message|trans }}

{{ message|transchoice(5) }}

{{ message|trans({'%name%': 'Fabien'}, "app") }}

{{ message|transchoice(5, {'%name%': 'Fabien'}, 'app') }}
    

Tip

Using the translation tags or filters have the same effect, but with one subtle difference: automatic output escaping is only applied to translations using a filter. In other words, if you need to be sure that your translated is not output escaped, you must apply the raw filter after the translation filter:

        1
2
3
4
5
6
7
8
9
10
        {# text translated between tags is never escaped #}
{% trans %}
    <h3>foo</h3>
{% endtrans %}

{% set message = '<h3>foo</h3>' %}

{# strings and variables translated via a filter is escaped by default #}
{{ message|trans|raw }}
{{ '<h3>bar</h3>'|trans|raw }}
    

PHP Templates

The translator service is accessible in PHP templates through the translator helper:

        1
2
3
4
5
6
7
        <?php echo $view['translator']->trans('Symfony2 is great') ?>

<?php echo $view['translator']->transChoice(
    '{0} There is no apples|{1} There is one apple|]1,Inf[ There are %count% apples',
    10,
    array('%count%' => 10)
) ?>
    

Forcing the Translator Locale

When translating a message, Symfony2 uses the locale from the user's session or the fallback locale if necessary. You can also manually specify the locale to use for translation:

        1
2
3
4
5
6
7
8
9
10
11
12
13
14
        $this->get('translator')->trans(
    'Symfony2 is great',
    array(),
    'messages',
    'fr_FR'
);

$this->get('translator')->transChoice(
    '{0} There are no apples|{1} There is one apple|]1,Inf[ There are %count% apples',
    10,
    array('%count%' => 10),
    'messages',
    'fr_FR'
);
    

Translating Database Content

The translation of database content should be handled by Doctrine through the Translatable Extension. For more information, see the documentation for that library.

Translating Constraint Messages

The best way to understand constraint translation is to see it in action. To start, suppose you've created a plain-old-PHP object that you need to use somewhere in your application:

        1
2
3
4
5
6
7
        // src/Acme/BlogBundle/Entity/Author.php
namespace Acme\BlogBundle\Entity;

class Author
{
    public $name;
}
    

Add constraints though any of the supported methods. Set the message option to the translation source text. For example, to guarantee that the $name property is not empty, add the following:

        1
2
3
4
5
        # src/Acme/BlogBundle/Resources/config/validation.yml
Acme\BlogBundle\Entity\Author:
    properties:
        name:
            - NotBlank: { message: "author.name.not_blank" }
    

        1
2
3
4
5
6
7
8
9
10
        // src/Acme/BlogBundle/Entity/Author.php
use Symfony\Component\Validator\Constraints as Assert;

class Author
{
    /**
     * @Assert\NotBlank(message = "author.name.not_blank")
     */
    public $name;
}
    

        1
2
3
4
5
6
7
8
9
10
11
12
13
14
        <!-- src/Acme/BlogBundle/Resources/config/validation.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<constraint-mapping xmlns="http://symfony.com/schema/dic/constraint-mapping"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://symfony.com/schema/dic/constraint-mapping http://symfony.com/schema/dic/constraint-mapping/constraint-mapping-1.0.xsd">

    <class name="Acme\BlogBundle\Entity\Author">
        <property name="name">
            <constraint name="NotBlank">
                <option name="message">author.name.not_blank</option>
            </constraint>
        </property>
    </class>
</constraint-mapping>
    

        1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
        // src/Acme/BlogBundle/Entity/Author.php

// ...
use Symfony\Component\Validator\Mapping\ClassMetadata;
use Symfony\Component\Validator\Constraints\NotBlank;

class Author
{
    public $name;

    public static function loadValidatorMetadata(ClassMetadata $metadata)
    {
        $metadata->addPropertyConstraint('name', new NotBlank(array(
            'message' => 'author.name.not_blank',
        )));
    }
}
    

Create a translation file under the validators catalog for the constraint messages, typically in the Resources/translations/ directory of the bundle. See Message Catalogues for more details.

        1
2
3
4
5
6
7
8
9
10
11
12
        <!-- validators.en.xliff -->
<?xml version="1.0"?>
<xliff version="1.2" xmlns="urn:oasis:names:tc:xliff:document:1.2">
    <file source-language="en" datatype="plaintext" original="file.ext">
        <body>
            <trans-unit id="1">
                <source>author.name.not_blank</source>
                <target>Please enter an author name.</target>
            </trans-unit>
        </body>
    </file>
</xliff>
    

        1
2
3
4
        // validators.en.php
return array(
    'author.name.not_blank' => 'Please enter an author name.',
);
    

        1
2
        # validators.en.yml
author.name.not_blank: Please enter an author name.
    

Summary

With the Symfony2 Translation component, creating an internationalized application no longer needs to be a painful process and boils down to just a few basic steps:

Abstract messages in your application by wrapping each in either the trans() or transChoice() methods;
Translate each message into multiple locales by creating translation message files. Symfony2 discovers and processes each file because its name follows a specific convention;
Manage the user's locale, which is stored in the session.

This work, including the code samples, is licensed under a Creative Commons BY-SA 3.0 license.

Translations

Translations

Configuration

Basic Translation

The Translation Process

Message Placeholders

Message Catalogues

Translation Locations and Naming Conventions

Creating Translations

Using Message Domains

Handling the User's Locale

Fallback and Default Locale

The Locale and the URL

Pluralization

Explicit Interval Pluralization

Translations in Templates

Twig Templates

PHP Templates

Forcing the Translator Locale

Translating Database Content

Translating Constraint Messages

Summary

What is Symfony?

Learn Symfony

Screencasts

Community

Blog

Services

Deployed on