Framework Configuration Reference (FrameworkBundle)
The FrameworkBundle defines the main framework configuration, from sessions and
translations to forms, validation, routing and more. All these options are
configured under the framework
key in your application configuration.
1 2 3 4 5
# displays the default config values defined by Symfony
$ php bin/console config:dump-reference framework
# displays the actual config values used by your application
$ php bin/console debug:config framework
Note
When using XML, you must use the http://symfony.com/schema/dic/symfony
namespace and the related XSD schema is available at:
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd
Configuration
secret
type: string
required
This is a string that should be unique to your application and it's commonly used to add more entropy to security related operations. Its value should be a series of characters, numbers and symbols chosen randomly and the recommended length is around 32 characters.
In practice, Symfony uses this value for encrypting the cookies used in the remember me functionality and for creating signed URIs when using ESI (Edge Side Includes). That's why you should treat this value as if it were a sensitive credential and never make it public.
This option becomes the service container parameter named kernel.secret
,
which you can use whenever the application needs an immutable random string
to add more entropy.
As with any other security-related parameter, it is a good practice to change this value from time to time. However, keep in mind that changing this value will invalidate all signed URIs and Remember Me cookies. That's why, after changing this value, you should regenerate the application cache and log out all the application users.
http_cache
5.2
The http_cache
option was introduced in Symfony 5.2.
enabled
type: boolean
default: false
debug
type: boolean
default: %kernel.debug%
If true, exceptions are thrown when things go wrong. Otherwise, the cache will try to carry on and deliver a meaningful response.
trace_level
type: string
possible values: 'none'
, 'short'
or 'full'
For 'short', a concise trace of the main request will be added as an HTTP header. 'full' will add traces for all requests (including ESI subrequests). (default: 'full' if in debug; 'none' otherwise)
default_ttl
type: integer
The number of seconds that a cache entry should be considered fresh when no explicit freshness information is provided in a response. Explicit Cache-Control or Expires headers override this value. (default: 0)
private_headers
type: array
Set of request headers that trigger "private" cache-control behavior on responses that don't explicitly state whether the response is public or private via a Cache-Control directive. (default: Authorization and Cookie)
allow_reload
type: string
Specifies whether the client can force a cache reload by including a
Cache-Control "no-cache" directive in the request. Set it to true
for compliance with RFC 2616. (default: false)
allow_revalidate
type: string
Specifies whether the client can force a cache revalidate by including a
Cache-Control "max-age=0" directive in the request. Set it to true
for compliance with RFC 2616. (default: false)
stale_while_revalidate
type: integer
Specifies the default number of seconds (the granularity is the second as the Response TTL precision is a second) during which the cache can immediately return a stale response while it revalidates it in the background (default: 2). This setting is overridden by the stale-while-revalidate HTTP Cache-Control extension (see RFC 5861).
stale_if_error
type: integer
Specifies the default number of seconds (the granularity is the second) during which the cache can serve a stale response when an error is encountered (default: 60). This setting is overridden by the stale-if-error HTTP Cache-Control extension (see RFC 5861).
http_method_override
type: boolean
default: true
This determines whether the _method
request parameter is used as the
intended HTTP method on POST requests. If enabled, the
Request::enableHttpMethodParameterOverride
method gets called automatically. It becomes the service container parameter
named kernel.http_method_override
.
See also
Changing the Action and HTTP Method of Symfony forms.
Caution
If you're using the HttpCache Reverse Proxy
with this option, the kernel will ignore the _method
parameter,
which could lead to errors.
To fix this, invoke the enableHttpMethodParameterOverride()
method
before creating the Request
object:
1 2 3 4 5 6 7 8
// public/index.php
// ...
$kernel = new CacheKernel($kernel);
Request::enableHttpMethodParameterOverride(); // <-- add this line
$request = Request::createFromGlobals();
// ...
trusted_headers
5.2
The trusted_headers
option was introduced in Symfony 5.2.
The trusted_headers
option is needed to configure which client information
should be trusted (e.g. their host) when running Symfony behind a load balancer
or a reverse proxy. See How to Configure Symfony to Work behind a Load Balancer or a Reverse Proxy.
trusted_proxies
5.2
The trusted_proxies
option was reintroduced in Symfony 5.2 (it had been
removed in Symfony 3.3).
The trusted_proxies
option is needed to get precise information about the
client (e.g. their IP address) when running Symfony behind a load balancer or a
reverse proxy. See How to Configure Symfony to Work behind a Load Balancer or a Reverse Proxy.
ide
type: string
default: null
Symfony turns file paths seen in variable dumps and exception messages into
links that open those files right inside your browser. If you prefer to open
those files in your favorite IDE or text editor, set this option to any of the
following values: phpstorm
, sublime
, textmate
, macvim
, emacs
,
atom
and vscode
.
Note
The phpstorm
option is supported natively by PhpStorm on macOS and
Windows; Linux requires installing phpstorm-url-handler.
If you use another editor, the expected configuration value is a URL template
that contains an %f
placeholder where the file path is expected and %l
placeholder for the line number (percentage signs (%
) must be escaped by
doubling them to prevent Symfony from interpreting them as container parameters).
1 2 3
# config/packages/framework.yaml
framework:
ide: 'myide://open?url=file://%%f&line=%%l'
1 2 3 4 5 6 7 8 9 10 11
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config ide="myide://open?url=file://%%f&line=%%l"/>
</container>
1 2 3 4 5 6
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->ide('myide://open?url=file://%%f&line=%%l');
};
Since every developer uses a different IDE, the recommended way to enable this feature is to configure it on a system level. First, you can set its value to some environment variable that stores the name of the IDE/editor:
1 2 3 4
# config/packages/framework.yaml
framework:
# the env var stores the IDE/editor name (e.g. 'phpstorm', 'vscode', etc.)
ide: '%env(resolve:CODE_EDITOR)%'
1 2 3 4 5 6 7 8 9 10 11 12
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<!-- the env var stores the IDE/editor name (e.g. 'phpstorm', 'vscode', etc.) -->
<framework:config ide="%env(resolve:CODE_EDITOR)%"/>
</container>
1 2 3 4 5 6 7
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
// the env var stores the IDE/editor name (e.g. 'phpstorm', 'vscode', etc.)
$framework->ide(env('CODE_EDITOR')->resolve());
};
5.3
The option to use env vars in the framework.ide
option was introduced
in Symfony 5.3.
Another alternative is to set the xdebug.file_link_format
option in your
php.ini
configuration file. The format to use is the same as for the
framework.ide
option, but without the need to escape the percent signs
(%
) by doubling them:
1 2 3 4 5 6 7 8
// example for PhpStorm
xdebug.file_link_format="phpstorm://open?file=%f&line=%l"
// example for PhpStorm with Jetbrains Toolbox
xdebug.file_link_format="jetbrains://phpstorm/navigate/reference?project=example&path=%f:%l"
// example for Sublime Text
xdebug.file_link_format="subl://open?url=file://%f&line=%l"
Note
If both framework.ide
and xdebug.file_link_format
are defined,
Symfony uses the value of the xdebug.file_link_format
option.
Tip
Setting the xdebug.file_link_format
ini option works even if the Xdebug
extension is not enabled.
Tip
When running your app in a container or in a virtual machine, you can tell
Symfony to map files from the guest to the host by changing their prefix.
This map should be specified at the end of the URL template, using &
and
>
as guest-to-host separators:
1 2 3 4 5 6 7
// /path/to/guest/.../file will be opened
// as /path/to/host/.../file on the host
// and /var/www/app/ as /projects/my_project/ also
'myide://%%f:%%l&/path/to/guest/>/path/to/host/&/var/www/app/>/projects/my_project/&...'
// example for PhpStorm
'phpstorm://open?file=%%f&line=%%l&/var/www/app/>/projects/my_project/'
test
type: boolean
If this configuration setting is present (and not false
), then the services
related to testing your application (e.g. test.client
) are loaded. This
setting should be present in your test
environment (usually via
config/packages/test/framework.yaml
).
See also
For more information, see Testing.
default_locale
type: string
default: en
The default locale is used if no _locale
routing parameter has been
set. It is available with the
Request::getDefaultLocale
method.
See also
You can read more information about the default locale in Translations.
enabled_locales
type: array
default: []
(empty array = enable all locales)
5.1
The enabled_locales
option was introduced in Symfony 5.1.
Symfony applications generate by default the translation files for validation and security messages in all locales. If your application only uses some locales, use this option to restrict the files generated by Symfony and improve performance a bit:
1 2 3
# config/packages/translation.yaml
framework:
enabled_locales: ['en', 'es']
1 2 3 4 5 6 7 8 9 10 11 12 13 14
<!-- config/packages/translation.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<enabled-locale>en</enabled-locale>
<enabled-locale>es</enabled-locale>
</framework:config>
</container>
1 2 3 4 5 6
// config/packages/translation.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->enabledLocales(['en', 'es']);
};
An added bonus of defining the enabled locales is that they are automatically
added as a requirement of the special _locale parameter.
For example, if you define this value as ['ar', 'he', 'ja', 'zh']
, the
_locale
routing parameter will have an ar|he|ja|zh
requirement. If some
user makes requests with a locale not included in this option, they'll see a 404 error.
set_content_language_from_locale
type: boolean
default: false
5.4
The set_content_language_from_locale
option was introduced in Symfony 5.4.
If this option is set to true
, the response will have a Content-Language
HTTP header set with the Request
locale.
set_locale_from_accept_language
type: boolean
default: false
5.4
The set_locale_from_accept_language
option was introduced in Symfony 5.4.
If this option is set to true
, the Request
locale will automatically be
set to the value of the Accept-Language
HTTP header.
When the _locale
request attribute is passed, the Accept-Language
header
is ignored.
disallow_search_engine_index
type: boolean
default: true
when the debug mode is enabled, false
otherwise.
If true
, Symfony adds a X-Robots-Tag: noindex
HTTP tag to all responses
(unless your own app adds that header, in which case it's not modified). This
X-Robots-Tag HTTP header tells search engines to not index your web site.
This option is a protection measure in case you accidentally publish your site
in debug mode.
trusted_hosts
type: array
| string
default: []
A lot of different attacks have been discovered relying on inconsistencies
in handling the Host
header by various software (web servers, reverse
proxies, web frameworks, etc.). Basically, every time the framework is
generating an absolute URL (when sending an email to reset a password for
instance), the host might have been manipulated by an attacker.
See also
You can read HTTP Host header attacks for more information about these kinds of attacks.
The Symfony Request::getHost()
method might be vulnerable to some of these attacks because it depends on
the configuration of your web server. One simple solution to avoid these
attacks is to configure a list of hosts that your Symfony application can respond
to. That's the purpose of this trusted_hosts
option. If the incoming
request's hostname doesn't match one of the regular expressions in this list,
the application won't respond and the user will receive a 400 response.
1 2 3
# config/packages/framework.yaml
framework:
trusted_hosts: ['^example\.com$', '^example\.org$']
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:trusted-host>^example\.com$</framework:trusted-host>
<framework:trusted-host>^example\.org$</framework:trusted-host>
<!-- ... -->
</framework:config>
</container>
1 2 3 4 5 6
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->trustedHosts(['^example\.com$', '^example\.org$']);
};
Hosts can also be configured to respond to any subdomain, via
^(.+\.)?example\.com$
for instance.
In addition, you can also set the trusted hosts in the front controller
using the Request::setTrustedHosts()
method:
1 2
// public/index.php
Request::setTrustedHosts(['^(.+\.)?example\.com$', '^(.+\.)?example\.org$']);
The default value for this option is an empty array, meaning that the application can respond to any given host.
See also
Read more about this in the Security Advisory Blog post.
form
enabled
type: boolean
default: true
or false
depending on your installation
Whether to enable the form services or not in the service container. If
you don't use forms, setting this to false
may increase your application's
performance because less services will be loaded into the container.
This option will automatically be set to true
when one of the child
settings is configured.
Note
This will automatically enable the validation.
See also
For more details, see Forms.
field_name
type: string
default: _token
This is the field name that you should give to the CSRF token field of your forms.
csrf_protection
See also
For more information about CSRF protection, see How to Implement CSRF Protection.
enabled
type: boolean
default: true
or false
depending on your installation
This option can be used to disable CSRF protection on all forms. But you can also disable CSRF protection on individual forms.
1 2 3 4
# config/packages/framework.yaml
framework:
# ...
csrf_protection: true
1 2 3 4 5 6 7 8 9 10 11 12 13
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:csrf-protection enabled="true"/>
</framework:config>
</container>
1 2 3 4 5 6 7
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->csrfProtection()
->enabled(true)
;
};
If you're using forms, but want to avoid starting your session (e.g. using
forms in an API-only website), csrf_protection
will need to be set to
false
.
error_controller
type: string
default: error_controller
This is the controller that is called when an exception is thrown anywhere in your application. The default controller (ErrorController) renders specific templates under different error conditions (see How to Customize Error Pages).
esi
See also
You can read more about Edge Side Includes (ESI) in Working with Edge Side Includes.
enabled
type: boolean
default: false
Whether to enable the edge side includes support in the framework.
You can also set esi
to true
to enable it:
1 2 3
# config/packages/framework.yaml
framework:
esi: true
1 2 3 4 5 6 7 8 9 10 11 12 13
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:esi/>
</framework:config>
</container>
1 2 3 4 5 6
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->esi()->enabled(true);
};
fragments
See also
Learn more about fragments in the HTTP Cache article.
enabled
type: boolean
default: false
Whether to enable the fragment listener or not. The fragment listener is used to render ESI fragments independently of the rest of the page.
This setting is automatically set to true
when one of the child settings
is configured.
hinclude_default_template
type: string
default: null
Sets the content shown during the loading of the fragment or when JavaScript is disabled. This can be either a template name or the content itself.
See also
See Creating and Using Templates for more information about hinclude.
path
type: string
default: /_fragment
The path prefix for fragments. The fragment listener will only be executed when the request starts with this path.
http_client
When the HttpClient component is installed, an HTTP client is available
as a service named http_client
or using the autowiring alias
HttpClientInterface.
This service can be configured using framework.http_client.default_options
:
1 2 3 4 5 6 7 8
# config/packages/framework.yaml
framework:
# ...
http_client:
max_host_connections: 10
default_options:
headers: { 'X-Powered-By': 'ACME App' }
max_redirects: 7
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:http-client max-host-connections="10">
<framework:default-options max-redirects="7">
<framework:header name="X-Powered-By">ACME App</framework:header>
</framework:default-options>
</framework:http-client>
</framework:config>
</container>
1 2 3 4 5 6 7 8 9 10 11 12
// config/packages/framework.php
$container->loadFromExtension('framework', [
'http_client' => [
'max_host_connections' => 10,
'default_options' => [
'headers' => [
'X-Powered-By' => 'ACME App',
],
'max_redirects' => 7,
],
],
]);
1 2 3 4 5 6
$client = HttpClient::create([
'headers' => [
'X-Powered-By' => 'ACME App',
],
'max_redirects' => 7,
], 10);
Multiple pre-configured HTTP client services can be defined, each with its
service name defined as a key under scoped_clients
. Scoped clients inherit
the default options defined for the http_client
service. You can override
these options and can define a few others:
1 2 3 4 5 6 7 8
# config/packages/framework.yaml
framework:
# ...
http_client:
scoped_clients:
my_api.client:
auth_bearer: secret_bearer_token
# ...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:http-client>
<framework:scoped-client name="my_api.client" auth-bearer="secret_bearer_token"/>
</framework:http-client>
</framework:config>
</container>
1 2 3 4 5 6 7 8 9 10 11
// config/packages/framework.php
$container->loadFromExtension('framework', [
'http_client' => [
'scoped_clients' => [
'my_api.client' => [
'auth_bearer' => 'secret_bearer_token',
// ...
],
],
],
]);
1 2 3 4
$client = HttpClient::createForBaseUri('https://...', [
'auth_bearer' => 'secret_bearer_token',
// ...
]);
Options defined for scoped clients apply only to URLs that match either their base_uri or the scope option when it is defined. Non-matching URLs always use default options.
Each scoped client also defines a corresponding named autowiring alias.
If you use for example
Symfony\Contracts\HttpClient\HttpClientInterface $myApiClient
as the type and name of an argument, autowiring will inject the my_api.client
service into your autowired classes.
auth_basic
type: string
The username and password used to create the Authorization
HTTP header
used in HTTP Basic authentication. The value of this option must follow the
format username:password
.
auth_bearer
type: string
The token used to create the Authorization
HTTP header used in HTTP Bearer
authentication (also called token authentication).
auth_ntlm
type: string
The username and password used to create the Authorization
HTTP header used
in the Microsoft NTLM authentication protocol. The value of this option must
follow the format username:password
. This authentication mechanism requires
using the cURL-based transport.
base_uri
type: string
URI that is merged into relative URIs, following the rules explained in the
RFC 3986 standard. This is useful when all the requests you make share a
common prefix (e.g. https://api.github.com/
) so you can avoid adding it to
every request.
Here are some common examples of how base_uri
merging works in practice:
bindto
type: string
A network interface name, IP address, a host name or a UNIX socket to use as the outgoing network interface.
buffer
type: boolean
| Closure
Buffering the response means that you can access its content multiple times
without performing the request again. Buffering is enabled by default when the
content type of the response is text/*
, application/json
or application/xml
.
If this option is a boolean value, the response is buffered when the value is
true
. If this option is a closure, the response is buffered when the
returned value is true
(the closure receives as argument an array with the
response headers).
cafile
type: string
The path of the certificate authority file that contains one or more certificates used to verify the other servers' certificates.
ciphers
type: string
A list of the names of the ciphers allowed for the SSL/TLS connections. They
can be separated by colons, commas or spaces (e.g. 'RC4-SHA:TLS13-AES-128-GCM-SHA256'
).
delay
type: integer
default: 1000
5.2
The delay
option was introduced in Symfony 5.2.
The initial delay in milliseconds used to compute the waiting time between retries.
enabled
type: boolean
default: false
Whether to enable the support for retry failed HTTP request or not. This setting is automatically set to true when one of the child settings is configured.
headers
type: array
An associative array of the HTTP headers added before making the request. This
value must use the format ['header-name' => 'value0, value1, ...']
.
http_codes
type: array
default: DEFAULT_RETRY_STATUS_CODES()
5.2
The http_codes
option was introduced in Symfony 5.2.
The list of HTTP status codes that triggers a retry of the request.
http_version
type: string
| null
default: null
The HTTP version to use, typically '1.1'
or '2.0'
. Leave it to null
to let Symfony select the best version automatically.
jitter
type: float
default: 0.1
(must be between 0.0 and 1.0)
5.2
The jitter
option was introduced in Symfony 5.2.
This option adds some randomness to the delay. It's useful to avoid sending
multiple requests to the server at the exact same time. The randomness is
calculated as delay * jitter
. For example: if delay is 1000ms
and jitter
is 0.2
, the actual delay will be a number between 800
and 1200
(1000 +/- 20%).
local_cert
type: string
The path to a file that contains the PEM formatted certificate used by the
HTTP client. This is often combined with the local_pk
and passphrase
options.
local_pk
type: string
The path of a file that contains the PEM formatted private key of the
certificate defined in the local_cert
option.
max_delay
type: integer
default: 0
5.2
The max_delay
option was introduced in Symfony 5.2.
The maximum amount of milliseconds initial to wait between retries.
Use 0
to not limit the duration.
max_duration
type: float
default: 0
The maximum execution time, in seconds, that the request and the response are allowed to take. A value lower than or equal to 0 means it is unlimited.
max_host_connections
type: integer
default: 6
Defines the maximum amount of simultaneously open connections to a single host (considering a "host" the same as a "host name + port number" pair). This limit also applies for proxy connections, where the proxy is considered to be the host for which this limit is applied.
max_redirects
type: integer
default: 20
The maximum number of redirects to follow. Use 0
to not follow any
redirection.
max_retries
type: integer
default: 3
5.2
The max_retries
option was introduced in Symfony 5.2.
The maximum number of retries for failing requests. When the maximum is reached, the client returns the last received response.
multiplier
type: float
default: 2
5.2
The multiplier
option was introduced in Symfony 5.2.
This value is multiplied to the delay each time a retry occurs, to distribute retries in time instead of making all of them sequentially.
no_proxy
type: string
| null
default: null
A comma separated list of hosts that do not require a proxy to be reached, even
if one is configured. Use the '*'
wildcard to match all hosts and an empty
string to match none (disables the proxy).
passphrase
type: string
The passphrase used to encrypt the certificate stored in the file defined in the
local_cert
option.
peer_fingerprint
type: array
When negotiating a TLS or SSL connection, the server sends a certificate indicating its identity. A public key is extracted from this certificate and if it does not exactly match any of the public keys provided in this option, the connection is aborted before sending or receiving any data.
The value of this option is an associative array of algorithm => hash
(e.g ['pin-sha256' => '...']
).
proxy
type: string
| null
The HTTP proxy to use to make the requests. Leave it to null
to detect the
proxy automatically based on your system configuration.
query
type: array
An associative array of the query string values added to the URL before making
the request. This value must use the format ['parameter-name' => parameter-value, ...]
.
resolve
type: array
A list of hostnames and their IP addresses to pre-populate the DNS cache used by the HTTP client in order to avoid a DNS lookup for those hosts. This option is useful to improve security when IPs are checked before the URL is passed to the client and to make your tests easier.
The value of this option is an associative array of domain => IP address
(e.g ['symfony.com' => '46.137.106.254', ...]
).
retry_failed
type: array
5.2
The retry_failed
option was introduced in Symfony 5.2.
This option configures the behavior of the HTTP client when some request fails, including which types of requests to retry and how many times. The behavior is defined with the following options:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
# config/packages/framework.yaml
framework:
# ...
http_client:
# ...
default_options:
retry_failed:
# retry_strategy: app.custom_strategy
http_codes:
0: ['GET', 'HEAD'] # retry network errors if request method is GET or HEAD
429: true # retry all responses with 429 status code
500: ['GET', 'HEAD']
max_retries: 2
delay: 1000
multiplier: 3
max_delay: 5000
jitter: 0.3
scoped_clients:
my_api.client:
# ...
retry_failed:
max_retries: 4
retry_strategy
type: string
5.2
The retry_strategy
option was introduced in Symfony 5.2.
The service is used to decide if a request should be retried and to compute the
time to wait between retries. By default, it uses an instance of
GenericRetryStrategy configured
with http_codes
, delay
, max_delay
, multiplier
and jitter
options. This class has to implement
RetryStrategyInterface.
scope
type: string
For scoped clients only: the regular expression that the URL must match before applying all other non-default options. By default, the scope is derived from base_uri.
timeout
type: float
default: depends on your PHP config
Time, in seconds, to wait for a response. If the response takes longer, a TransportException is thrown. Its default value is the same as the value of PHP's default_socket_timeout config option.
verify_host
type: boolean
default: true
If true
, the certificate sent by other servers is verified to ensure that
their common name matches the host included in the URL. This is usually
combined with verify_peer
to also verify the certificate authenticity.
verify_peer
type: boolean
default: true
If true
, the certificate sent by other servers when negotiating a TLS or SSL
connection is verified for authenticity. Authenticating the certificate is not
enough to be sure about the server, so you should combine this with the
verify_host
option.
profiler
enabled
type: boolean
default: false
The profiler can be enabled by setting this option to true
. When you
install it using Symfony Flex, the profiler is enabled in the dev
and test
environments.
Note
The profiler works independently from the Web Developer Toolbar, see the WebProfilerBundle configuration on how to disable/enable the toolbar.
collect
type: boolean
default: true
This option configures the way the profiler behaves when it is enabled. If set
to true
, the profiler collects data for all requests. If you want to only
collect information on-demand, you can set the collect
flag to false
and
activate the data collectors manually:
1
$profiler->enable();
collect_parameter
type: string
default: null
This specifies name of a query parameter, a body parameter or a request attribute
used to enable or disable collection of data by the profiler for each request.
Combine it with the collect
option to enable/disable the profiler on demand:
- If the
collect
option is set totrue
but this parameter exists in a request and has any value other thantrue
,yes
,on
or1
, the request data will not be collected; - If the
collect
option is set tofalse
, but this parameter exists in a request and has value oftrue
,yes
,on
or1
, the request data will be collected.
5.4
The collect_parameter
option was introduced in Symfony 5.4.
only_exceptions
type: boolean
default: false
When this is set to true
, the profiler will only be enabled when an
exception is thrown during the handling of the request.
only_main_requests
type: boolean
default: false
5.3
The only_main_requests
option was introduced in Symfony 5.3. In previous
versions it was called only_master_requests
.
When this is set to true
, the profiler will only be enabled on the main
requests (and not on the subrequests).
dsn
type: string
default: file:%kernel.cache_dir%/profiler
The DSN where to store the profiling information.
rate_limiter
name
type: prototype
Name of the rate limiter you want to create.
lock_factory
type: string
default: lock.factory
The service that is used to create a lock. The service has to be an instance of the LockFactory class.
policy
type: string
required
The name of the rate limiting algorithm to use. Example names are fixed_window
,
sliding_window
and no_limit
. See Rate Limiter Policies)
for more information.
request
formats
type: array
default: []
This setting is used to associate additional request formats (e.g. html
)
to one or more mime types (e.g. text/html
), which will allow you to use the
format & mime types to call
Request::getFormat($mimeType) or
Request::getMimeType($format).
In practice, this is important because Symfony uses it to automatically set the
Content-Type
header on the Response
(if you don't explicitly set one).
If you pass an array of mime types, the first will be used for the header.
To configure a jsonp
format:
1 2 3 4 5
# config/packages/framework.yaml
framework:
request:
formats:
jsonp: 'application/javascript'
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony
https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:request>
<framework:format name="jsonp">
<framework:mime-type>application/javascript</framework:mime-type>
</framework:format>
</framework:request>
</framework:config>
</container>
1 2 3 4 5 6 7
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->request()
->format('jsonp', 'application/javascript');
};
router
resource
type: string
required
The path the main routing resource (e.g. a YAML file) that contains the routes and imports the router should load.
type
type: string
The type of the resource to hint the loaders about the format. This isn't
needed when you use the default routers with the expected file extensions
(.xml
, .yaml
, .php
).
default_uri
type: string
5.1
The default_uri
option was introduced in Symfony 5.1.
The default URI used to generate URLs in a non-HTTP context (see Generating URLs in Commands).
http_port
type: integer
default: 80
The port for normal http requests (this is used when matching the scheme).
https_port
type: integer
default: 443
The port for https requests (this is used when matching the scheme).
strict_requirements
type: mixed
default: true
Determines the routing generator behavior. When generating a route that has specific parameter requirements, the generator can behave differently in case the used parameters do not meet these requirements.
The value can be one of:
true
- Throw an exception when the requirements are not met;
false
-
Disable exceptions when the requirements are not met and return
''
instead; null
- Disable checking the requirements (thus, match the route even when the requirements don't match).
true
is recommended in the development environment, while false
or null
might be preferred in production.
utf8
type: boolean
default: false
5.1
Not setting this option is deprecated since Symfony 5.1. Moreover, the
default value of this option will change to true
in Symfony 6.0.
When this option is set to true
, the regular expressions used in the
requirements of route parameters will be run
using the utf-8 modifier. This will for example match any UTF-8 character
when using .
, instead of matching only a single byte.
If the charset of your application is UTF-8 (as defined in the
getCharset() method of your kernel) it's
recommended setting it to true
. This will make non-UTF8 URLs to generate 404
errors.
secrets
decryption_env_var
type: string
default: base64:default::SYMFONY_DECRYPTION_SECRET
The env var name that contains the vault decryption secret. By default, this value will be decoded from base64.
local_dotenv_file
type: string
default: %kernel.project_dir%/.env.%kernel.environment%.local
The path to the local .env
file. This file must contain the vault
decryption key, given by the decryption_env_var
option.
vault_directory
type: string
default: %kernel.project_dir%/config/secrets/%kernel.runtime_environment%
The directory to store the secret vault. By default, the path uses the current environment.
session
storage_factory_id
type: string
default: session.storage.factory.native
The service ID used for creating the SessionStorageInterface
that stores
the session. This service is available in the Symfony application via the
session.storage.factory
service alias. The class has to implement
SessionStorageFactoryInterface.
To see a list of all available storages, run:
1
$ php bin/console debug:container session.storage.factory.
5.3
The storage_factory_id
option was introduced in Symfony 5.3 as a replacement
of the storage_id
option.
handler_id
type: string
default: session.handler.native_file
The service id or DSN used for session storage. The default value 'session.handler.native_file'
will let Symfony manage the sessions itself using files to store the session metadata.
Set it to null
to use the native PHP session mechanism.
It is possible to store sessions in a database,
and also to configure the session handler with a DSN:
1 2 3 4 5 6 7 8
# config/packages/framework.yaml
framework:
session:
# a few possible examples
handler_id: 'redis://localhost'
handler_id: '%env(REDIS_URL)%'
handler_id: '%env(DATABASE_URL)%'
handler_id: 'file://%kernel.project_dir%/var/sessions'
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<!-- a few possible examples -->
<framework:session enabled="true"
handler-id="redis://localhost"
handler-id="%env(REDIS_URL)%"
handler-id="%env(DATABASE_URL)%"
handler-id="file://%kernel.project_dir%/var/sessions"/>
</framework:config>
</container>
1 2 3 4 5 6 7 8 9 10 11 12 13 14
// config/packages/framework.php
use function Symfony\Component\DependencyInjection\Loader\Configurator\env;
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework): void {
// ...
$framework->session()
// a few possible examples
->handlerId('redis://localhost')
->handlerId(env('REDIS_URL'))
->handlerId(env('DATABASE_URL'))
->handlerId('file://%kernel.project_dir%/var/sessions');
};
Note
Supported DSN protocols are the following:
file
redis
rediss
(Redis over TLS)memcached
(requires symfony/cache)pdo_oci
(requires doctrine/dbal)mssql
mysql
mysql2
pgsql
postgres
postgresql
sqlsrv
sqlite
sqlite3
name
type: string
This specifies the name of the session cookie.
If not set, php.ini
's session.name directive will be relied on.
cookie_lifetime
type: integer
This determines the lifetime of the session - in seconds.
Setting this value to 0
means the cookie is valid for
the length of the browser session.
If not set, php.ini
's session.cookie_lifetime directive will be relied on.
cookie_path
type: string
This determines the path to set in the session cookie.
If not set, php.ini
's session.cookie_path directive will be relied on.
cache_limiter
type: string
default: 0
If set to 0
, Symfony won't set any particular header related to the cache
and it will rely on php.ini
's session.cache_limiter directive.
Unlike the other session options, cache_limiter
is set as a regular
container parameter:
1 2 3 4
# config/services.yaml
parameters:
session.storage.options:
cache_limiter: 0
1 2 3 4 5 6 7 8 9 10 11 12 13
<!-- config/services.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd">
<parameters>
<parameter key="session.storage.options" type="collection">
<parameter key="cache_limiter">0</parameter>
</parameter>
</parameters>
</container>
1 2 3 4
// config/services.php
$container->setParameter('session.storage.options', [
'cache_limiter' => 0,
]);
Be aware that if you configure it, you'll have to set other session-related options as parameters as well.
cookie_domain
type: string
This determines the domain to set in the session cookie.
If not set, php.ini
's session.cookie_domain directive will be relied on.
cookie_samesite
type: string
or null
default: null
It controls the way cookies are sent when the HTTP request did not originate from the same domain that is associated with the cookies. Setting this option is recommended to mitigate CSRF security attacks.
By default, browsers send all cookies related to the domain of the HTTP request.
This may be a problem for example when you visit a forum and some malicious
comment includes a link like https://some-bank.com/?send_money_to=attacker&amount=1000
.
If you were previously logged into your bank website, the browser will send all
those cookies when making that HTTP request.
The possible values for this option are:
null
, usephp.ini
's session.cookie_samesite directive.'none'
(or theSymfony\Component\HttpFoundation\Cookie::SAMESITE_NONE
constant), use it to allow sending of cookies when the HTTP request originated from a different domain (previously this was the default behavior of null, but in newer browsers'lax'
would be applied when the header has not been set)'strict'
(or theCookie::SAMESITE_STRICT
constant), use it to never send any cookie when the HTTP request did not originate from the same domain.'lax'
(or theCookie::SAMESITE_LAX
constant), use it to allow sending cookies when the request originated from a different domain, but only when the user consciously made the request (by clicking a link or submitting a form with theGET
method).
Note
Same-site cookies are a PHP 7.3 feature, but Symfony has a polyfill so you can set this option with any older PHP version as well.
cookie_secure
type: boolean
or 'auto'
This determines whether cookies should only be sent over secure connections. In
addition to true
and false
, there's a special 'auto'
value that
means true
for HTTPS requests and false
for HTTP requests.
If not set, php.ini
's session.cookie_secure directive will be relied on.
cookie_httponly
type: boolean
default: true
This determines whether cookies should only be accessible through the HTTP protocol. This means that the cookie won't be accessible by scripting languages, such as JavaScript. This setting can effectively help to reduce identity theft through XSS attacks.
gc_divisor
type: integer
See gc_probability.
If not set, php.ini
's session.gc_divisor directive will be relied on.
gc_probability
type: integer
default: 1
This defines the probability that the garbage collector (GC) process is
started on every session initialization. The probability is calculated by
using gc_probability
/ gc_divisor
, e.g. 1/100 means there is a 1%
chance that the GC process will start on each request.
gc_maxlifetime
type: integer
This determines the number of seconds after which data will be seen as "garbage" and potentially cleaned up. Garbage collection may occur during session start and depends on gc_divisor and gc_probability.
If not set, php.ini
's session.gc_maxlifetime directive will be relied on.
sid_length
type: integer
This determines the length of session ID string, which can be an integer between
22
and 256
(both inclusive), 32
being the recommended value. Longer
session IDs are harder to guess.
If not set, php.ini
's session.sid_length directive will be relied on.
sid_bits_per_character
type: integer
This determines the number of bits in the encoded session ID character. The possible
values are 4
(0-9, a-f), 5
(0-9, a-v), and 6
(0-9, a-z, A-Z, "-", ",").
The more bits results in stronger session ID. 5
is recommended value for
most environments.
If not set, php.ini
's session.sid_bits_per_character directive will be relied on.
save_path
type: string
or null
default: %kernel.cache_dir%/sessions
This determines the argument to be passed to the save handler. If you choose the default file handler, this is the path where the session files are created.
If null
, php.ini
's session.save_path directive will be relied on:
1 2 3 4
# config/packages/framework.yaml
framework:
session:
save_path: ~
1 2 3 4 5 6 7 8 9 10 11 12 13
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:session save-path="null"/>
</framework:config>
</container>
1 2 3 4 5 6 7
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->session()
->savePath(null);
};
metadata_update_threshold
type: integer
default: 0
This is how many seconds to wait between updating/writing the session metadata. This can be useful if, for some reason, you want to limit the frequency at which the session persists, instead of doing that on every request.
enabled
type: boolean
default: true
Whether to enable the session support in the framework.
1 2 3 4
# config/packages/framework.yaml
framework:
session:
enabled: true
1 2 3 4 5 6 7 8 9 10 11 12 13
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:session enabled="true"/>
</framework:config>
</container>
1 2 3 4 5 6 7
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->session()
->enabled(true);
};
use_cookies
type: boolean
This specifies if the session ID is stored on the client side using cookies or not.
If not set, php.ini
's session.use_cookies directive will be relied on.
assets
base_path
type: string
This option allows you to define a base path to be used for assets:
1 2 3 4 5
# config/packages/framework.yaml
framework:
# ...
assets:
base_path: '/images'
1 2 3 4 5 6 7 8 9 10 11 12 13
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:assets base-path="/images"/>
</framework:config>
</container>
1 2 3 4 5 6 7 8
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
// ...
$framework->assets()
->basePath('/images');
};
base_urls
type: array
This option allows you to define base URLs to be used for assets. If multiple base URLs are provided, Symfony will select one from the collection each time it generates an asset's path:
1 2 3 4 5 6
# config/packages/framework.yaml
framework:
# ...
assets:
base_urls:
- 'http://cdn.example.com/'
1 2 3 4 5 6 7 8 9 10 11 12 13
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:assets base-url="http://cdn.example.com/"/>
</framework:config>
</container>
1 2 3 4 5 6 7 8
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
// ...
$framework->assets()
->baseUrls(['http://cdn.example.com/']);
};
packages
You can group assets into packages, to specify different base URLs for them:
1 2 3 4 5 6 7
# config/packages/framework.yaml
framework:
# ...
assets:
packages:
avatars:
base_urls: 'http://static_cdn.example.com/avatars'
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:assets>
<framework:package
name="avatars"
base-url="http://static_cdn.example.com/avatars"/>
</framework:assets>
</framework:config>
</container>
1 2 3 4 5 6 7 8 9
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
// ...
$framework->assets()
->package('avatars')
->baseUrls(['http://static_cdn.example.com/avatars']);
};
Now you can use the avatars
package in your templates:
1
<img src="{{ asset('...', 'avatars') }}">
Each package can configure the following options:
version
type: string
This option is used to bust the cache on assets by globally adding a query
parameter to all rendered asset paths (e.g. /images/logo.png?v2
). This
applies only to assets rendered via the Twig asset()
function (or PHP
equivalent).
For example, suppose you have the following:
1
<img src="{{ asset('images/logo.png') }}" alt="Symfony!"/>
By default, this will render a path to your image such as /images/logo.png
.
Now, activate the version
option:
1 2 3 4 5
# config/packages/framework.yaml
framework:
# ...
assets:
version: 'v2'
1 2 3 4 5 6 7 8 9 10 11 12 13
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:assets version="v2"/>
</framework:config>
</container>
1 2 3 4 5 6 7 8
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
// ...
$framework->assets()
->version('v2');
};
Now, the same asset will be rendered as /images/logo.png?v2
If you use
this feature, you must manually increment the version
value
before each deployment so that the query parameters change.
You can also control how the query string works via the version_format option.
Note
This parameter cannot be set at the same time as version_strategy
or json_manifest_path
.
Tip
As with all settings, you can use a parameter as value for the
version
. This makes it easier to increment the cache on each
deployment.
version_format
type: string
default: %%s?%%s
This specifies a sprintf pattern that will be used with the
version option to construct an asset's path. By default, the pattern
adds the asset's version as a query string. For example, if
version_format
is set to %%s?version=%%s
and version
is set to 5
, the asset's path would be /images/logo.png?version=5
.
Note
All percentage signs (%
) in the format string must be doubled to
escape the character. Without escaping, values might inadvertently be
interpreted as Service Container.
Tip
Some CDN's do not support cache-busting via query strings, so injecting
the version into the actual file path is necessary. Thankfully,
version_format
is not limited to producing versioned query
strings.
The pattern receives the asset's original path and version as its first
and second parameters, respectively. Since the asset's path is one
parameter, you cannot modify it in-place (e.g. /images/logo-v5.png
);
however, you can prefix the asset's path using a pattern of
version-%%2$s/%%1$s
, which would result in the path
version-5/images/logo.png
.
URL rewrite rules could then be used to disregard the version prefix before serving the asset. Alternatively, you could copy assets to the appropriate version path as part of your deployment process and forgot any URL rewriting. The latter option is useful if you would like older asset versions to remain accessible at their original URL.
version_strategy
type: string
default: null
The service id of the asset version strategy applied to the assets. This option can be set globally for all assets and individually for each asset package:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
# config/packages/framework.yaml
framework:
assets:
# this strategy is applied to every asset (including packages)
version_strategy: 'app.asset.my_versioning_strategy'
packages:
foo_package:
# this package removes any versioning (its assets won't be versioned)
version: ~
bar_package:
# this package uses its own strategy (the default strategy is ignored)
version_strategy: 'app.asset.another_version_strategy'
baz_package:
# this package inherits the default strategy
base_path: '/images'
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:assets version-strategy="app.asset.my_versioning_strategy">
<!-- this package removes any versioning (its assets won't be versioned) -->
<framework:package
name="foo_package"
version="null"/>
<!-- this package uses its own strategy (the default strategy is ignored) -->
<framework:package
name="bar_package"
version-strategy="app.asset.another_version_strategy"/>
<!-- this package inherits the default strategy -->
<framework:package
name="baz_package"
base_path="/images"/>
</framework:assets>
</framework:config>
</container>
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
// ...
$framework->assets()
->versionStrategy('app.asset.my_versioning_strategy');
$framework->assets()->package('foo_package')
// this package removes any versioning (its assets won't be versioned)
->version(null);
$framework->assets()->package('bar_package')
// this package uses its own strategy (the default strategy is ignored)
->versionStrategy('app.asset.another_version_strategy');
$framework->assets()->package('baz_package')
// this package inherits the default strategy
->basePath('/images');
};
Note
This parameter cannot be set at the same time as version
or json_manifest_path
.
json_manifest_path
type: string
default: null
The file path or absolute URL to a manifest.json
file containing an
associative array of asset names and their respective compiled names. A common
cache-busting technique using a "manifest" file works by writing out assets with
a "hash" appended to their file names (e.g. main.ae433f1cb.css
) during a
front-end compilation routine.
Tip
Symfony's Webpack Encore supports outputting hashed assets. Moreover, this can be incorporated into many other workflows, including Webpack and Gulp using webpack-manifest-plugin and gulp-rev, respectively.
This option can be set globally for all assets and individually for each asset package:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
# config/packages/framework.yaml
framework:
assets:
# this manifest is applied to every asset (including packages)
json_manifest_path: "%kernel.project_dir%/public/build/manifest.json"
# you can use absolute URLs too and Symfony will download them automatically
# json_manifest_path: 'https://cdn.example.com/manifest.json'
packages:
foo_package:
# this package uses its own manifest (the default file is ignored)
json_manifest_path: "%kernel.project_dir%/public/build/a_different_manifest.json"
# Throws an exception when an asset is not found in the manifest
strict_mode: %kernel.debug%
bar_package:
# this package uses the global manifest (the default file is used)
base_path: '/images'
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<!-- this manifest is applied to every asset (including packages) -->
<framework:assets json-manifest-path="%kernel.project_dir%/public/build/manifest.json">
<!-- you can use absolute URLs too and Symfony will download them automatically -->
<!-- <framework:assets json-manifest-path="https://cdn.example.com/manifest.json"> -->
<!-- this package uses its own manifest (the default file is ignored) -->
<!-- Throws an exception when an asset is not found in the manifest -->
<framework:package
name="foo_package"
json-manifest-path="%kernel.project_dir%/public/build/a_different_manifest.json" strict-mode="%kernel.debug%"/>
<!-- this package uses the global manifest (the default file is used) -->
<framework:package
name="bar_package"
base-path="/images"/>
</framework:assets>
</framework:config>
</container>
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
// ...
$framework->assets()
// this manifest is applied to every asset (including packages)
->jsonManifestPath('%kernel.project_dir%/public/build/manifest.json');
// you can use absolute URLs too and Symfony will download them automatically
// 'json_manifest_path' => 'https://cdn.example.com/manifest.json',
$framework->assets()->package('foo_package')
// this package uses its own manifest (the default file is ignored)
->jsonManifestPath('%kernel.project_dir%/public/build/a_different_manifest.json')
// Throws an exception when an asset is not found in the manifest
->setStrictMode('%kernel.debug%');
$framework->assets()->package('bar_package')
// this package uses the global manifest (the default file is used)
->basePath('/images');
};
5.1
The option to use an absolute URL in json_manifest_path
was introduced
in Symfony 5.1.
Note
This parameter cannot be set at the same time as version
or version_strategy
.
Additionally, this option cannot be nullified at the package scope if a global manifest
file is specified.
Tip
If you request an asset that is not found in the manifest.json
file, the original -
unmodified - asset path will be returned.
Since Symfony 5.4, you can set strict_mode
to true
to get an exception when an asset is not found.
Note
If a URL is set, the JSON manifest is downloaded on each request using the http_client.
strict_mode
type: boolean
default: false
5.4
The strict_mode
option was introduced in Symfony 5.4.
When enabled, the strict mode asserts that all requested assets are in the
manifest file. This option is useful to detect typos or missing assets, the
recommended value is %kernel.debug%
.
translator
cache_dir
type: string
| null
default: %kernel.cache_dir%/translations
Defines the directory where the translation cache is stored. Use null
to
disable this cache.
enabled
type: boolean
default: true
or false
depending on your installation
Whether or not to enable the translator
service in the service container.
enabled_locales
type: array
default: []
(empty array = enable all locales)
5.1
The enabled_locales
option was introduced in Symfony 5.1.
5.4
Using framework.translator.enabled_locales
has been deprecated in favor of
framework.enabled_locales since Symfony 5.4.
fallbacks
type: string|array
default: value of default_locale
This option is used when the translation key for the current locale wasn't found.
See also
For more details, see Translations.
logging
default: true
when the debug mode is enabled, false
otherwise.
When true
, a log entry is made whenever the translator cannot find a translation
for a given key. The logs are made to the translation
channel at the
debug
level for keys where there is a translation in the fallback
locale, and the warning
level if there is no translation to use at all.
formatter
type: string
default: translator.formatter.default
The ID of the service used to format translation messages. The service class must implement the MessageFormatterInterface.
paths
type: array
default: []
This option allows to define an array of paths where the component will look for translation files. The later a path is added, the more priority it has (translations from later paths overwrite earlier ones). Translations from the default_path have more priority than translations from all these paths.
default_path
type: string
default: %kernel.project_dir%/translations
This option allows to define the path where the application translations files are stored.
providers
type: array
default: []
5.3
The providers
option was introduced in Symfony 5.3.
This option enables and configures translation providers to push and pull your translations to/from third party translation services.
property_access
magic_call
type: boolean
default: false
When enabled, the property_accessor
service uses PHP's
magic __call() method when
its getValue()
method is called.
magic_get
type: boolean
default: true
When enabled, the property_accessor
service uses PHP's
magic __get() method when
its getValue()
method is called.
5.2
The magic_get
option was introduced in Symfony 5.2.
magic_set
type: boolean
default: true
When enabled, the property_accessor
service uses PHP's
magic __set() method when
its setValue()
method is called.
5.2
The magic_set
option was introduced in Symfony 5.2.
throw_exception_on_invalid_index
type: boolean
default: false
When enabled, the property_accessor
service throws an exception when you
try to access an invalid index of an array.
throw_exception_on_invalid_property_path
type: boolean
default: true
When enabled, the property_accessor
service throws an exception when you
try to access an invalid property path of an object.
property_info
enabled
type: boolean
default: true
or false
depending on your installation
validation
enabled
type: boolean
default: true
or false
depending on your installation
Whether or not to enable validation support.
This option will automatically be set to true
when one of the child
settings is configured.
enable_annotations
type: boolean
default: false
If this option is enabled, validation constraints can be defined using annotations or attributes.
translation_domain
type: string | false
default: validators
The translation domain that is used when translating validation constraint error messages. Use false to disable translations.
not_compromised_password
The NotCompromisedPassword constraint makes HTTP requests to a public API to check if the given password has been compromised in a data breach.
enabled
type: boolean
default: true
If you set this option to false
, no HTTP requests will be made and the given
password will be considered valid. This is useful when you don't want or can't
make HTTP requests, such as in dev
and test
environments or in
continuous integration servers.
endpoint
type: string
default: null
By default, the NotCompromisedPassword constraint uses the public API provided by haveibeenpwned.com. This option allows to define a different, but compatible, API endpoint to make the password checks. It's useful for example when the Symfony application is run in an intranet without public access to the internet.
static_method
type: string | array
default: ['loadValidatorMetadata']
Defines the name of the static method which is called to load the validation metadata of the class. You can define an array of strings with the names of several methods. In that case, all of them will be called in that order to load the metadata.
email_validation_mode
type: string
default: loose
Sets the default value for the "mode" option of the Email validator.
mapping
paths
type: array
default: ['config/validation/']
This option allows to define an array of paths with files or directories where the component will look for additional validation files:
1 2 3 4 5 6
# config/packages/framework.yaml
framework:
validation:
mapping:
paths:
- "%kernel.project_dir%/config/validation/"
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:validation>
<framework:mapping>
<framework:path>%kernel.project_dir%/config/validation/</framework:path>
</framework:mapping>
</framework:validation>
</framework:config>
</container>
1 2 3 4 5 6 7 8
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->validation()
->mapping()
->paths(['%kernel.project_dir%/config/validation/']);
};
annotations
cache
type: string
default: php_array
This option can be one of the following values:
- php_array
- Use a PHP array to cache annotations in memory
- file
- Use the filesystem to cache annotations
- none
- Disable the caching of annotations
- a service id
- A service id referencing a Doctrine Cache implementation
5.3
Using a service ID as the value of cache
is deprecated since Symfony 5.3.
file_cache_dir
type: string
default: %kernel.cache_dir%/annotations
The directory to store cache files for annotations, in case
annotations.cache
is set to 'file'
.
debug
type: boolean
default: %kernel.debug%
Whether to enable debug mode for caching. If enabled, the cache will automatically update when the original file is changed (both with code and annotation changes). For performance reasons, it is recommended to disable debug mode in production, which will happen automatically if you use the default value.
secrets
decryption_env_var
type: string
default: base64:default::SYMFONY_DECRYPTION_SECRET
The environment variable that contains the decryption key.
local_dotenv_file
type: string
default: %kernel.project_dir%/.env.%kernel.environment%.local
Path to an dotenv file that holds secrets. This is primarily used for testing.
vault_directory
type: string
default: %kernel.project_dir%/config/secrets/%kernel.environment%
The directory where the vault of secrets is stored.
serializer
enabled
type: boolean
default: true
or false
depending on your installation
Whether to enable the serializer
service or not in the service container.
enable_annotations
type: boolean
default: false
If this option is enabled, serialization groups can be defined using annotations or attributes.
See also
For more information, see How to Use the Serializer.
name_converter
type: string
The name converter to use.
The CamelCaseToSnakeCaseNameConverter
name converter can enabled by using the serializer.name_converter.camel_case_to_snake_case
value.
See also
For more information, see The Serializer Component.
circular_reference_handler
type string
The service id that is used as the circular reference handler of the default
serializer. The service has to implement the magic __invoke($object)
method.
See also
For more information, see The Serializer Component.
mapping
paths
type: array
default: []
This option allows to define an array of paths with files or directories where the component will look for additional serialization files.
default_context
type: array
default: []
A map with default context options that will be used with each serialize
and deserialize
call. This can be used for example to set the json encoding behavior by setting json_encode_options
to a json_encode flags bitmask.
5.4
The default_context
parameter was introduced in Symfony 5.4.
php_errors
log
type: boolean|int
default: %kernel.debug%
Use the application logger instead of the PHP logger for logging PHP errors. When an integer value is used, it also sets the log level. Those integer values must be the same used in the error_reporting PHP option.
This option also accepts a map of PHP errors to log levels:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
# config/packages/framework.yaml
framework:
php_errors:
log:
!php/const \E_DEPRECATED: !php/const Psr\Log\LogLevel::ERROR
!php/const \E_USER_DEPRECATED: !php/const Psr\Log\LogLevel::ERROR
!php/const \E_NOTICE: !php/const Psr\Log\LogLevel::ERROR
!php/const \E_USER_NOTICE: !php/const Psr\Log\LogLevel::ERROR
!php/const \E_STRICT: !php/const Psr\Log\LogLevel::ERROR
!php/const \E_WARNING: !php/const Psr\Log\LogLevel::ERROR
!php/const \E_USER_WARNING: !php/const Psr\Log\LogLevel::ERROR
!php/const \E_COMPILE_WARNING: !php/const Psr\Log\LogLevel::ERROR
!php/const \E_CORE_WARNING: !php/const Psr\Log\LogLevel::ERROR
!php/const \E_USER_ERROR: !php/const Psr\Log\LogLevel::CRITICAL
!php/const \E_RECOVERABLE_ERROR: !php/const Psr\Log\LogLevel::CRITICAL
!php/const \E_COMPILE_ERROR: !php/const Psr\Log\LogLevel::CRITICAL
!php/const \E_PARSE: !php/const Psr\Log\LogLevel::CRITICAL
!php/const \E_ERROR: !php/const Psr\Log\LogLevel::CRITICAL
!php/const \E_CORE_ERROR: !php/const Psr\Log\LogLevel::CRITICAL
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<!-- in XML configuration you cannot use PHP constants as the value of
the 'type' attribute, which makes this format way less readable.
Consider using YAML or PHP for this configuration -->
<framework:log type="8" logLevel="error"/>
<framework:log type="2" logLevel="error"/>
<!-- ... -->
</framework:config>
</container>
1 2 3 4 5 6 7 8 9
// config/packages/framework.php
use Psr\Log\LogLevel;
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->phpErrors()->log(\E_DEPRECATED, LogLevel::ERROR);
$framework->phpErrors()->log(\E_USER_DEPRECATED, LogLevel::ERROR);
// ...
};
5.3
The option to map PHP errors to log levels was introduced in Symfony 5.3.
throw
type: boolean
default: %kernel.debug%
Throw PHP errors as \ErrorException
instances. The parameter
debug.error_handler.throw_at
controls the threshold.
cache
app
type: string
default: cache.adapter.filesystem
The cache adapter used by the cache.app
service. The FrameworkBundle
ships with multiple adapters: cache.adapter.apcu
, cache.adapter.doctrine
,
cache.adapter.system
, cache.adapter.filesystem
, cache.adapter.psr6
,
cache.adapter.redis
, cache.adapter.memcached
, cache.adapter.pdo
,
cache.adapter.doctrine_dbal
.
5.4
cache.adapter.doctrine_dbal
was introduced in Symfony 5.4.
5.4
Using cache.adapter.doctrine
has been deprecated in favor of Symfony
Cache or PSR-6 adapters provided by Doctrine Cache and will be removed in
6.0.
There's also a special adapter called cache.adapter.array
which stores
contents in memory using a PHP array and it's used to disable caching (mostly on
the dev
environment).
Tip
It might be tough to understand at the beginning, so to avoid confusion remember that all pools perform the same actions but on different medium given the adapter they are based on. Internally, a pool wraps the definition of an adapter.
system
type: string
default: cache.adapter.system
The cache adapter used by the cache.system
service. It supports the same
adapters available for the cache.app
service.
directory
type: string
default: %kernel.cache_dir%/pools
The path to the cache directory used by services inheriting from the
cache.adapter.filesystem
adapter (including cache.app
).
default_doctrine_provider
type: string
The service name to use as your default Doctrine provider. The provider is
available as the cache.default_doctrine_provider
service.
default_psr6_provider
type: string
The service name to use as your default PSR-6 provider. It is available as
the cache.default_psr6_provider
service.
default_redis_provider
type: string
default: redis://localhost
The DSN to use by the Redis provider. The provider is available as the cache.default_redis_provider
service.
default_memcached_provider
type: string
default: memcached://localhost
The DSN to use by the Memcached provider. The provider is available as the cache.default_memcached_provider
service.
default_pdo_provider
type: string
default: doctrine.dbal.default_connection
The service id of the database connection, which should be either a PDO or a
Doctrine DBAL instance. The provider is available as the cache.default_pdo_provider
service.
pools
type: array
A list of cache pools to be created by the framework extension.
See also
For more information about how pools work, see cache pools.
To configure a Redis cache pool with a default lifetime of 1 hour, do the following:
1 2 3 4 5 6 7
# config/packages/framework.yaml
framework:
cache:
pools:
cache.mycache:
adapter: cache.adapter.redis
default_lifetime: 3600
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
<!-- config/packages/framework.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:cache>
<framework:pool
name="cache.mycache"
adapter="cache.adapter.redis"
default-lifetime="3600"
/>
</framework:cache>
<!-- ... -->
</framework:config>
</container>
1 2 3 4 5 6 7 8 9
// config/packages/framework.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->cache()
->pool('cache.mycache')
->adapters(['cache.adapter.redis'])
->defaultLifetime(3600);
};
name
type: prototype
Name of the pool you want to create.
Note
Your pool name must differ from cache.app
or cache.system
.
adapter
type: string
default: cache.app
The service name of the adapter to use. You can specify one of the default
services that follow the pattern cache.adapter.[type]
. Alternatively you
can specify another cache pool as base, which will make this pool inherit the
settings from the base pool as defaults.
Note
Your service needs to implement the Psr\Cache\CacheItemPoolInterface
interface.
tags
type: boolean
| string
default: null
Whether your service should be able to handle tags or not. Can also be the service id of another cache pool where tags will be stored.
default_lifetime
type: integer
| string
Default lifetime of your cache items. Give an integer value to set the default
lifetime in seconds. A string value could be ISO 8601 time interval, like "PT5M"
or a PHP date expression that is accepted by strtotime()
, like "5 minutes"
.
If no value is provided, the cache adapter will fallback to the default value on the actual cache storage.
provider
type: string
Overwrite the default service name or DSN respectively, if you do not want to
use what is configured as default_X_provider
under cache
. See the
description of the default provider setting above for information on how to
specify your specific provider.
clearer
type: string
The cache clearer used to clear your PSR-6 cache.
See also
For more information, see Psr6CacheClearer.
prefix_seed
type: string
default: _%kernel.project_dir%.%kernel.container_class%
This value is used as part of the "namespace" generated for the
cache item keys. A common practice is to use the unique name of the application
(e.g. symfony.com
) because that prevents naming collisions when deploying
multiple applications into the same path (on different servers) that share the
same cache backend.
It's also useful when using blue/green deployment strategies and more generally, when you need to abstract out the actual deployment directory (for example, when warming caches offline).
Note
The prefix_seed
option is used at compile time. This means
that any change made to this value after container's compilation
will have no effect.
5.2
Starting from Symfony 5.2, the %kernel.container_class%
parameter is no
longer appended automatically to the value of this option. This allows
sharing caches between applications or different environments.
lock
type: string
| array
The default lock adapter. If not defined, the value is set to semaphore
when
available, or to flock
otherwise. Store's DSN are also allowed.
enabled
type: boolean
default: true
Whether to enable the support for lock or not. This setting is
automatically set to true
when one of the child settings is configured.
resources
type: array
A list of lock stores to be created by the framework extension.
1 2 3
# config/packages/lock.yaml
framework:
lock: '%env(LOCK_DSN)%'
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
<!-- config/packages/lock.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:lock>
<framework:resource>%env(LOCK_DSN)%</framework:resource>
</framework:lock>
</framework:config>
</container>
1 2 3 4 5 6 7
// config/packages/lock.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->lock()
->resource('default', [env('LOCK_DSN')]);
};
See also
For more details, see Dealing with Concurrency with Locks.
mailer
dsn
type: string
default: null
The DSN used by the mailer. When several DSN may be used, use
transports
option (see below) instead.
transports
type: array
A list of DSN that can be used by the mailer. A transport name is the key and the dsn is the value.
message_bus
5.1
The message_bus
option was introduced in Symfony 5.1.
type: string
default: null
or default bus if Messenger component is installed
Service identifier of the message bus to use when using the
Messenger component (e.g. messenger.default_bus
).
envelope
sender
type: string
The "envelope sender" which is used as the value of MAIL FROM
during the
SMTP session. This value overrides any other sender set in the code.
recipients
type: array
The "envelope recipient" which is used as the value of RCPT TO
during the
the SMTP session. This value overrides any other recipient set in the code.
1 2 3 4 5 6
# config/packages/mailer.yaml
framework:
mailer:
dsn: 'smtp://localhost:25'
envelope:
recipients: ['admin@symfony.com', 'lead@symfony.com']
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
<!-- config/packages/mailer.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:mailer dsn="smtp://localhost:25">
<framework:envelope>
<framework:recipient>admin@symfony.com</framework:recipient>
<framework:recipient>lead@symfony.com</framework:recipient>
</framework:envelope>
</framework:mailer>
</framework:config>
</container>
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
// config/packages/mailer.php
namespace Symfony\Component\DependencyInjection\Loader\Configurator;
return static function (ContainerConfigurator $container): void {
$container->extension('framework', [
'mailer' => [
'dsn' => 'smtp://localhost:25',
'envelope' => [
'recipients' => [
'admin@symfony.com',
'lead@symfony.com',
],
],
],
]);
};
headers
5.2
The headers
mailer option was introduced in Symfony 5.2.
type: array
Headers to add to emails. The key (name
attribute in xml format) is the
header name and value the header value.
See also
For more information, see Configuring Emails Globally
messenger
enabled
type: boolean
default: true
Whether to enable or not Messenger.
See also
For more details, see the Messenger component documentation.
web_link
enabled
type: boolean
default: true
or false
depending on your installation
Adds a Link HTTP header to the response.
workflows
type: array
A list of workflows to be created by the framework extension:
1 2 3 4 5
# config/packages/workflow.yaml
framework:
workflows:
my_workflow:
# ...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
<!-- config/packages/workflow.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:workflows>
<framework:workflow
name="my_workflow"/>
</framework:workflows>
<!-- ... -->
</framework:config>
</container>
1 2 3 4 5 6 7 8 9
// config/packages/workflow.php
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->workflows()
->workflows('my_workflow')
// ...
;
};
See also
See also the article about using workflows in Symfony applications.
enabled
type: boolean
default: false
Whether to enable the support for workflows or not. This setting is
automatically set to true
when one of the child settings is configured.
name
type: prototype
Name of the workflow you want to create.
initial_marking
type: string
| array
One of the places
or empty
. If not null and the supported object is not
already initialized via the workflow, this place will be set.
marking_store
type: array
Each marking store can define any of these options:
property
(type:string
default:marking
)service
(type:string
)type
(type:string
allow value:'method'
)
metadata
type: array
Metadata available for the workflow configuration.
Note that places
and transitions
can also have their own
metadata
entry.
supports
type: string
| array
The FQCN (fully-qualified class name) of the object supported by the workflow configuration or an array of FQCN if multiple objects are supported.
support_strategy
type: string
transitions
type: array
Each marking store can define any of these options:
from
(type:string
orarray
) value from theplaces
, multiple values are allowed for bothworkflow
andstate_machine
;guard
(type:string
) an ExpressionLanguage compatible expression to block the transition;name
(type:string
) the name of the transition;to
(type:string
orarray
) value from theplaces
, multiple values are allowed only forworkflow
.
type
type: string
possible values: 'workflow'
or 'state_machine'
Defines the kind of workflow that is going to be created, which can be either a normal workflow or a state machine. Read this article to know their differences.
exceptions
type: array
5.4
The exceptions
option was introduced in Symfony 5.4.
Defines the log level and HTTP status code applied to the exceptions that match the given exception class:
1 2 3 4 5 6
# config/packages/exceptions.yaml
framework:
exceptions:
Symfony\Component\HttpKernel\Exception\BadRequestHttpException:
log_level: 'debug'
status_code: 422
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
<!-- config/packages/exceptions.xml -->
<?xml version="1.0" encoding="UTF-8" ?>
<container xmlns="http://symfony.com/schema/dic/services"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:framework="http://symfony.com/schema/dic/symfony"
xsi:schemaLocation="http://symfony.com/schema/dic/services
https://symfony.com/schema/dic/services/services-1.0.xsd
http://symfony.com/schema/dic/symfony https://symfony.com/schema/dic/symfony/symfony-1.0.xsd">
<framework:config>
<framework:exception
class="Symfony\Component\HttpKernel\Exception\BadRequestHttpException"
log-level="debug"
status-code="422"
/>
<!-- ... -->
</framework:config>
</container>
1 2 3 4 5 6 7 8 9 10
// config/packages/exceptions.php
use Symfony\Component\HttpKernel\Exception\BadRequestHttpException;
use Symfony\Config\FrameworkConfig;
return static function (FrameworkConfig $framework) {
$framework->exception(BadRequestHttpException::class)
->logLevel('debug')
->statusCode(422)
;
};
The order in which you configure exceptions is important because Symfony will
use the configuration of the first exception that matches instanceof
:
1 2 3 4 5 6 7 8 9 10
# config/packages/exceptions.yaml
framework:
exceptions:
Exception:
log_level: 'debug'
status_code: 404
# The following configuration will never be used because \RuntimeException extends \Exception
RuntimeException:
log_level: 'debug'
status_code: 422